Multi Tech Equipment MultiModemZBA MT5634ZBA-V-V92 Manual Do Utilizador
4 AT Commands, S-Registers, & Result Codes
42
MultiModemZBA-V-V92 User Guide
16
46666 bps
17
48000 bps
18
49333 bps
19
50666 bps
20
52000 bps
21
53333 bps
22
54666 bps
23
56000 bps
S42
decimal
0–1
1
Enables/disables the 56K auto rate. When
56K auto is disabled, fallback to V.34 is also
disabled. 0 = disable; 1 = enable.
56K auto is disabled, fallback to V.34 is also
disabled. 0 = disable; 1 = enable.
S48
decimal
7 or 128
7
Enables (7) or disables (128) LAPM
negotiation. The following table lists the S36
and S48 configuration settings for certain
types of connections.
negotiation. The following table lists the S36
and S48 configuration settings for certain
types of connections.
S48=7
S48=128
LAPM or async
Async
LAPM or hangup
Do not use
LAPM, MNP, or aysnc
LAPM, MNP, or hangup
MNP or hangup
MNP or async
S36=0, 2
S36=1, 3
S36=4, 6
S36=5, 7
S89
seconds 0, 5–255
0
Sets the length of time in the off-line
command mode before the modem goes
into standby mode. A value of zero prevents
standby mode; a value of 1–4 sets the value
to 5.
command mode before the modem goes
into standby mode. A value of zero prevents
standby mode; a value of 1–4 sets the value
to 5.
S108
decimal
0–3, 6, 7
6
Selects the 56K digital loss if using the
modem thru a PBX line. The default value is
-6 dB loss, the value used when calling from
a typical POTS line long distance.
modem thru a PBX line. The default value is
-6 dB loss, the value used when calling from
a typical POTS line long distance.
Value Digital loss
0
-0 dB digital loss, no robbed-bit
signaling
signaling
1
-3 dB PBX digital loss
2
-2 dB digital loss
3
-3 dB digital loss
6
-6 dB digital loss
7
-0 dB digital loss with robbed-bit
signaling
signaling
Register Unit
Range
Default
Description