Fujitsu 510 Manual Do Utilizador
2-8
Using the Point 510 Pen Tablet
Other Suspend/Resume Issues
2
Other issues you should consider when suspending or resuming pen tablet operation
are as follows:
are as follows:
• When the Point 510 pen tablet is in suspend mode, data stops going to and from
the pen tablet. Some programs might temporarily keep the Point 510 pen tablet in
the Fully On state to prevent interrupting processes like data transfer until the data
is completely transferred. This preserves the quality and completeness of the data.
the Fully On state to prevent interrupting processes like data transfer until the data
is completely transferred. This preserves the quality and completeness of the data.
• Your system may be set up to suspend operation automatically if you do not use
the system for some period.
• If the battery charge drops below the critically low charge level (the amber Low
Battery light is flashing quickly), the system is forced into suspend mode and will
not resume until a charged battery pack is installed or external power is attached.
not resume until a charged battery pack is installed or external power is attached.
• The Point 510 Power button is not pressure sensitive. If the pen tablet does not go
into Suspend mode (or Fully Off) within a few seconds, do not press the button
harder. Pressing the button harder may damage the pen tablet.
harder. Pressing the button harder may damage the pen tablet.
• When the Point 510 pen tablet shuts down, it emits a beep (if the speaker is on).
This lets you know that it is going into the Fully Off state.
Charging the Battery Pack
2
The Point 510 battery pack can be charged while it is installed in the Point 510 pen
tablet. You can use the pen tablet, or press the Power button to suspend or turn off the
pen tablet, without interrupting the charging process.
tablet. You can use the pen tablet, or press the Power button to suspend or turn off the
pen tablet, without interrupting the charging process.