Chauvet SX GOBO DMX512 Manual Do Utilizador
Figure A
Figure B
Figure C
Replacing Gobos
1)
Open the top cover by removing the
six screws indicated in figure A.
2)
Remove the retaining spring using a
flathead screwdriver (figure B).
3)
Remove the gobo and replace with a
new gobo.
Note:
The black side of the gobo should be
facing the lamp.
4)
Reinsert the retaining spring.
Note:
The two springs indicated in figure C
can be used to hold gel inserts or
dichroic glass. This is optional, and is
not included with the SX Gobo.
5)
Replace the top cover.
SX Gobo Manual
8
2006-12-11/15:16