AT&T Data Service Units 3551 Manual Do Utilizador

Configuring the Unit

5-3

3550-A2-GB20-10

February 1995

Saving Configuration Options

CAUTION

Be extremely careful when saving
configuration options to avoid
saving them to the wrong
location.

To save edited configuration options:

Procedure

1. From any configuration option in any option set,

press the

key to return to the Edit/Save

submenu.

2. Press the F1 key below SAVE.

3. Select area (Activ, Remt, Usr1) on the Save to

screen.

•

If Activ is selected, your changes take effect
immediately.

•

If Usr1 is selected, your changes are stored for
future use.

•

If the unit is a control and Remt is selected, the
complete set (all option sets available to the
unit) of configurations are sent to the tributary
and saved to its Activ area.

Remember that you cannot save to the factory-
loaded configurations.

Example Using the DCP

In this example, load the configuration options stored

in the PTPT area, change Diagnostic Type (Diag Type)
under the Diagnostic (DSU) option set from Disr to
NonD, change DTE Port under the General option set
from EIA232 to V.35, then save the changes to the Usr1
area, and return to the main or top-level menu.

Procedure

Press the DCP keys indicated by the shading.

Port 1 DSU

9.6 C

Local

Remot

Local Mode:
Stat

Bckup

Test

Local Mode:
Bckup

Test

Confg

Configure:
Opts

PList

Dir

Load from:
Activ

Remt

Usr1

Load from:
Remt

Usr1

PTPC

Load from:
Usr1

PTPC

PTPT