Auralex Acoustics Elite Pro Systems EPS-168T Manual Do Utilizador
Elite Pro System Installations
See the
Auralex
®
Acoustics
website,
www.auralex.com
, for more information
about these and other
Total Sound Control
®
products.
These are general recommendations. Should you have any additional questions about the installation of your
Elite Pro System
, feel free to contact an
Auralex
®
Application Specialist
via email at
appsupport@auralex.com
or call
1-800-95-WEDGE
.
➋
Within traced
ProFusor outline, mark another
rectangle 4” in from both sides, 5.25” down from
the top and 2.75” up from the bottom. Install one
the top and 2.75” up from the bottom. Install one
Z-
Clip in each corner of the marked inner rectangle
using drywall screws, as shown.
➊
Hold the
ProFusor to the wall or ceiling in its
intended location with the back facing out.
Make sure diffusor is level. Completely trace its
outline.
Make sure diffusor is level. Completely trace its
outline.
4”
5.25”
2.75”
4”
Marked inner
rectangle
rectangle
Traced
ProFusor
Outline
ProFusor
Outline
➌
On the back of the
ProFusor, mark a rectangle 4”
in from the outer edge on all sides. Install one
Z-
Clip in each corner of the marked inner rectangle
using drywall screws, as shown.
using drywall screws, as shown.
4”
4”
4”
4”
➍
Set
ProFusor into place.
Wall