American International Electric SEG-1 Manual Do Utilizador
3.9 SEG-M Installation (Plug On Module)
The SEG-M plug on module was created to allow HubMax and MiniMax panels an easier way to use the SEG-M functionality. When
used with HubMax or Hub MiniMax panels, no power or communication wiring is required between the SEG-M and the backplane.
All connections are made through the connector used to connect the SEG-M module to the backplane. To connect to a Max 3 or
MiniMax 3 you must use the supplied cable to make the connections to the module and the backplane.
used with HubMax or Hub MiniMax panels, no power or communication wiring is required between the SEG-M and the backplane.
All connections are made through the connector used to connect the SEG-M module to the backplane. To connect to a Max 3 or
MiniMax 3 you must use the supplied cable to make the connections to the module and the backplane.
3.9.1 SEG-M Diagram
The diagram below is a top view of the SEG-M for reference. Section 3.9.2 describes the connectors and their functions. Section 3.9.3
describes the LED indicators.
describes the LED indicators.
Page 12 of 34 Document Number: 6066005, Rev 3.2