Alesis M1 Active Mk2 Manual De Referência

Front baffle painted in metallic charcoal-gray, one inch (1”) thick MDF with
radiused edges to minimize diffraction. Sides and rear baffle covered in
metallic charcoal-gray vinyl laminate, over five-eighths inch (0.625”) thick
MDF.

Dual ports with 45

°

 inlet and flared front baffle outlet allow precise, phase

accurate woofer-to-port frequency transition. Ports also aid in cooling
internally mounted primary amplifier heat sink.

Flush mount, rubber woofer trim ring allows consistent power response
characteristic at wide off-axis angles.  Flush-mount tweeter plate assures
smooth off-axis response.

UL-approved fiberglass acoustical damping material damps internal mid-
frequency reflections from rear of woofer cone before entering port, lessening
IM distortion.

6.5” (165mm) diameter dynamic driver with proprietary non-woven carbon
fiber (NWCF) cone and 1.5” diameter, long-wind voice coil.

Dampened linear rubber surround with moderate internal damping and
constant linear displacement Nomex spider. 

±

5 mm X-max excursion

capability.

Dual magnet structure uses top magnet in opposed (“bucking”) configuration
for magnetic shielding.

 

1” silk soft-dome tweeter with special wave guide baffle.

Low-viscosity ferrofluid cooling extends power handling while retaining
impulse response capability.

Dual magnet structure uses top magnet in opposed (“bucking”) configuration
for magnetic shielding.