Adam Equipment Weather Radio MCW-250L Manual Do Utilizador
© Adam Equipment Company 2008
6
4.0 SETTING UP THE SCALE
The MCW-250L comes with a chair fitted on the scale platform.
There is no assembly necessary, attach the indicator to the bracket,
simply plug in the power supply and it is ready for use.
The indicator could be removed from the chair for mounting to the
wall or used on a table top. Brackets are available for wall
mounting the indicator.
There is no assembly necessary, attach the indicator to the bracket,
simply plug in the power supply and it is ready for use.
The indicator could be removed from the chair for mounting to the
wall or used on a table top. Brackets are available for wall
mounting the indicator.
POWER SUPPLY
The scale uses an internal re-chargeable battery. If the external
power supply is to be used, plug it into the jack on the indicator.
When the battery is low, a low battery symbol will be displayed in the left
of the display. Connect the adapter to recharge the battery.
When the battery is low, a low battery symbol will be displayed in the left
of the display. Connect the adapter to recharge the battery.
5.0 WEIGHING
• Place the Scale on an even floor and press the [On/Off] key.
• The instrument performs a self-test after which it is ready for
operation. The display will show “
0.0
” with an arrow symbol,
above kg or lb, indicating the last chosen unit.
• The arrow above Stab will be on when the reading is stable.
o
Press the [On/Off] key to switch off the scale. If the scale is
not to be used for a long time, the main power switch should
be turned off to save the battery life.
be turned off to save the battery life.
• To start weighing, press [On/Off], the scale will show “0.0”.