Adtran Two-Way Radio ISU 2X64 Manual Do Utilizador
Appendix C: Status Buffer Messages
106
ISU 2x64 Dual Port ISDN Service Unit User Manual
61200051L1-1D
NOT end2end ISDN
The path that the call was routed over is not ISDN from end-to-
end (warning only).
end (warning only).
NUMBER_CHANGED
The number dialed has been changed.
OUTGOING_CALL_BARRED
The network will not allow the outgoing call to be placed.
PROTOCOL_ERROR
Call control error.
REQ_CHANNEL_NOT_AVAIL
The channel type requested is currently not available.
Remote not ISU
Bonding negotiation determined the far-end unit is not another
ISU. (Asynchronous rates can only be supported between two
ADTRAN ISUs when Rev. 0 Bonding Mode 1 is selected. Rev. 1
Bonding Mode 1 will interoperate with other vendor terminal
adapters in asynchronous DTE operation.)
ISU. (Asynchronous rates can only be supported between two
ADTRAN ISUs when Rev. 0 Bonding Mode 1 is selected. Rev. 1
Bonding Mode 1 will interoperate with other vendor terminal
adapters in asynchronous DTE operation.)
RESP_TO_STAT_ENQ
Response to status inquiry.
Ring 1/2
An incoming call on either the first or second channel entered the
Ring state. The calling phone number is displayed if available.
Ring state. The calling phone number is displayed if available.
S cmd not = or ?
User did not use proper syntax.
SAP idle timeout
Unit at far-end is not configured to use the SAP protocol.
SERVICE_NOT_AVAIL
The requested service is not available.
SOURCE NOT ISDN
The incoming calling party is not ISDN (warning only).