AMANO PIX-10 Manual Do Utilizador

When setting the time you must use 24 hour format (i.e.
13:00 = 1:00 pm). This will NOT make the clock print 
military time, it simply tells the clock am from pm.

a. When the display flashes P2  CCLoc, tap 

the 

l right button.

b. The small “12” will flash. Tap the 

l right button again.

c. The hour digits will flash. Tap the 

t

t

left button until the correct hour 

appears. Remember to use a 24 hour 
format (2:00 pm = 14:00). Then tap the 
l right button.

d. The minutes digits will flash. Tap the

t

t

left button until the correct minutes

appear, then tap the 

l right button twice.

e. When the display flashes P2  CCLoc, tap the

t

t

left button until you see End, then

tap the 

l right button.

Note: If you do not use Daylight Saving Time, you need to disable
the Daylight Saving Time feature. Putting the same dates in program
level P3 and P4 does this. If you need assistance or have any 
questions, please contact us at 1-800-253-9836.

(Mon. - Fri. 8:00 - 5:00  PST)