Motorola USBW 100 Manual Do Utilizador

Establishing Wi-Fi Connections 

However, the Motorola Connection Manager cannot detect the actual name 
of or establish a connection to a closed network unless you create a profile 
for that network. For more information, see the following: 
How to access a closed network 
How to create a WiFi Network Profile 

To access a closed network with the Motorola Connection Manager, you 
must set up a Profile for that network. Follow these steps to create a closed 
Network Profile: 
1.  Click the on the 

 button. The Network Profiles window will 

now be displayed. 

2.  Select the 

 heading in the left pane of the network profiles 

window. 

3.  Click the 

 button. The first page of properties for the new profile 

appears. 

4.  Enter the name of the network you want to add in the 

 field. Be 

aware that the network name is case sensitive and must be entered 
exactly as provided by the administrator of the closed network to 
which you want to connect. 

5.  Check the 

 box to identify 

this as a closed network. 

6.  Fill out the remaining fields on this window as instructed by the 

administrator of the closed network. 

7.  Click 

. The IP Settings page appears. 

8.  The default selections on the IP Properties page are correct for most 

networks. If, however, this particular network requires specific IP 
address and/or DNS server settings, you can specify them here. 

9.  Click 

 The General page appears. 

10. Configure the settings on the General page as desired and then click 

 to exit the profile wizard.