Motorola USBW 100 Manual Do Utilizador

Creating and Managing Network Profiles 

5.  If you are configuring a profile for a closed network, check 

. 

6.  If the network whose profile you are configuring does not use WEP or 

WPA encryption, no further security configuration is necessary, the 

 should remain unchecked and no further 

configuration is necessary on this page. 

7.  If the network does use WEP or WPA encryption, check the 

 box and configure the WiFi data encryption settings 

(see Enabling WiFi Data Encryption for instructions).  

8.  Click 

. The General page appears. 

9.  Configure the settings on the General page and then click 

. 

Follow these steps to create an Ethernet Network Profile: 
1.  Click the 

 button in the main window of the Motorola 

Connection Manager software. The Network Profiles window will now 
be displayed. 

2.  Click on the 

 heading in the list of profiles on the left side of 

the window. 

3.  Click the 

 button. The Ethernet page of the Add Profile Wizard 

appears. 

4.  In the fields provided, enter the criteria that the Motorola Connection 

Manager should use when attempting to match this profile to Ethernet 
networks that you connect to. You must enter a value in at least one 
of these fields (it does not matter which). Additional fields are 
optional. 

5.  Click 

 to continue to the IP Properties page. 

6.  The default selections on the IP Properties page are correct for most 

networks. If, however, this particular network requires specific IP 
address and/or DNS server settings, you can specify them here. 

7.  Click 

. The General page appears.