Mitel Navigator 3300 ICP Manual Do Utilizador

Navigator User Guide 

To play music from your PC on your Navigator Handsfree speakers: 

•  Plug the Navigator audio cable into the appropriate port on your PC. 

For more detailed information on connecting PC accessories to the Navigator, refer to the 
Navigator Installation Guide shipped with the phone. 

To use some features, you must dial access codes. The codes are flexible and may be different 
than those in this guide. Ask your Administrator for a list of codes you should use. 

If during a call, you hear two beeps repeated every 20 seconds it means that your phone is 
switching to a secondary 3300 ICP system. The call continues but some of the keys and features 
on your phone function differently. The keys and most features begin working normally again after 
you hang up. If your phone switches to the secondary system while your speaker or handset is 

muted (that is, while the 

 key light is on), the call remains muted until you hang up. Normal 

operation resumes when your phone switches back to the primary system. If your phone is idle 
and switched to the secondary system, you'll see a flashing rectangle on the display. The 
rectangle remains until the switch to the primary system is complete. 

Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you 
cradle the handset between your ear and shoulder. If you use your phone a lot, you may find it 
more comfortable to use a headset. See the section on headset usage elsewhere in this guide for 
more information.  

Your phone has a control for adjusting the volume of the handset receiver or headset. Because 
continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a 
moderate level.