Mitel Navigator 3300 ICP Manual Do Utilizador
Navigator User Guide
41
Reminder
To program a Reminder:
1. Press (SUPERKEY).
2. Press
the
No softkey until "Timed Reminder?" appears.
3. Press
the
Yes softkey.
4. Enter the time in 24-hour format.
5. Press
the
Save softkey.
To view, change, and/or cancel a pending Reminder:
6. Press (SUPERKEY).
7. Press
the
No softkey until "Timed Reminder?" appears.
8. Press
the
Yes softkey.
9. Do one of the following:
• To change the Reminder, press the Change softkey, enter the new time, and press the
Save softkey.
• To cancel the Reminder, press the Clear softkey.
• To exit without canceling the Reminder, press
(SUPERKEY).
To acknowledge a Reminder when your phone rings once:
• Press
the
Confirm softkey.
Tag Call
Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the
tag, your system administrator or telephone company can identify the source of the call and
provide this information to appropriate personnel or authorities.
tag, your system administrator or telephone company can identify the source of the call and
provide this information to appropriate personnel or authorities.
CAUTION: Tagging a non-malicious call may result in fines or other penalties.
To tag a malicious call, do one of the following:
• Press
the
Tag Call feature key while the call is in progress.
See Personal Feature Keys on page 15 for instructions on programming a Tag Call key to
your phone.
your phone.
• Press
(TRANS/CONF), then dial *55.
If the call was successfully tagged, the display shows "Thank You"; otherwise, the display shows
"Not Allowed".
"Not Allowed".
Note: Tag Call can be used on active two-party calls only. Calls on hold and conference calls
cannot be tagged.