BMW 2006 330xi Sedan Manual Do Proprietário

Telephoning

174

and is confirmed by a tone, depending on
the type of mobile phone you are using.

Switching between mobile

phone and hands-free system

From mobile phone to hands-free

system

You can continue ongoing calls outside of the
vehicle's Bluetooth range via the hands-free
system as long as the engine is running or the
ignition is switched on. Depending on your
mobile phone, the system automatically
switches to hands-free mode.
With mobile phones that do not automatically
switch to hands-free mode:

Depending on the type of mobile phone you
are using, you can continue the conversa-
tion via the hands-free system, if necessary.
Refer to the display on your mobile phone
and/or your mobile phone's operating
instructions.

Press the

button above the storage

compartment. The changeover can take
several seconds.

From hands-free system to mobile
phone

If you are making a call via the hands-free sys-
tem, you can also continue the call via the
mobile phone, if necessary, depending on your
mobile phone model. Refer to the display on
your mobile phone and/or your mobile phone's
operating instructions.

Operation by voice

commands*

The concept

You can operate your mobile phone without
having to take a hand off the steering wheel.
During your entries, you will be guided in many
cases by announcements and questions.
The same prerequisites apply as for operation
via iDrive, refer to page

170

Symbols in the Owner's Manual

Saying commands

Activating the system

Briefly press the

button on the steering

wheel.
A sound signal indicates that you can say
commands.

Say the command.
The text or numbers that the voice com-
mand system has registered will appear on
the Control Display.

Ending/canceling operation by voice

commands

Briefly press the

button on the steering

wheel or

In dialogs where text is spoken, e.g. a name
rather than a command, canceling is only possi-
ble using the button on the steering wheel.

Having the possible commands read
aloud

The system recognizes specific commands
that must be pronounced exactly word for word.
You can have the possible commands for any
function read aloud to you:

{...}Say the specified commands word for
word.
{{...}} Indicates responses of the system.

{Cancel}.

{Help}