BMW 2006 330xi Sedan Manual Do Proprietário

Página de 245
 83
Technology for driving comfort and safety
PDC Park Distance Control*
The concept
The PDC assists you with maneuvering in tight 
parking spaces.  Acoustic signals and a visual 
indicator
 
warn you of the presence of an object 
in front of
or behind your car. To measure the 
distance, there are four ultrasonic sensors in 
each bumper.
These sensors have a range of approx. 6.5 ft/
2 m. However, an acoustic warning does not 
sound until an object is approx. 2 ft/60 cm from 
the front sensors
*
 or both rear corner sensors, 
or approx. 5 ft/1.50 m from the rear center sen-
sors.
PDC is a parking aid that can indicate 
objects when they are approached 
slowly, as is usually the case when parking. 
Avoid approaching an object at high speed, oth-
erwise physical circumstances may lead to the 
system warning being issued too late.
<
Automatic mode
With the engine running or the ignition switched 
on, the system is activated automatically after 
approx. 1 second when you engage reverse 
gear or move the automatic transmission selec-
tor lever to position R. Wait this short period 
before driving.
Switching on manually
Press the button, the LED lights up.
Switching off manually
Press the button again; the LED goes out.
The system is automatically deactivated once 
the vehicle travels approx. 165 ft/50 m or 
exceeds a speed of approx. 20 mph or 30 km/h; 
the LED goes out. You can reactivate the sys-
tem as needed.
Signal tones
When nearing an object, its position is indicated 
correspondingly by an interval tone. For exam-
ple, the tone sounds at the rear if the system 
detects an object behind the car. As the dis-
tance between vehicle and object decreases, 
the intervals between the tones become 
shorter. If the distance to the nearest object 
falls to below roughly 1 ft/30 cm, then a contin-
uous tone sounds.
The warning signal is canceled after approx. 
3 seconds, if you are moving parallel to a wall.
Malfunction
The indicator lamp in the instrument 
cluster comes on. PDC is malfunc-
tioning. A message appears on the 
Control Display. Have the system checked.
To avoid this problem, keep the sensors clean 
and free of ice or snow in order to ensure that 
they will continue to operate effectively. When 
using a high-pressure cleaner, do not spray the 
sensors for extended periods of time and only 
from a distance of at least 4 in/10 cm.
Manual mode
The LED above the button flashes in addition.
PDC with optical warning
You can also have the system show distances 
to objects on the Control Display. The contours 
of distant objects are shown on the Control Dis-
play even before the acoustic signal sounds.
iDrive concept, refer to page
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG