BMW 2006 330xi Sedan Manual Do Proprietário

Página de 245
 87
Malfunction in driving stability control 
systems
The warning lamps come on. DSC 
including DTC and DBC is malfunc-
tioning. 
The vehicle remains operational. 
Have the system checked as soon as possible.
Drive cautiously and think well ahead, 
otherwise unstable driving conditions 
could result.
<
323i*, 325i, 330i
The warning lamps for the brake sys-
tem come on in red, together with the 
yellow indicator lamps for driving sta-
bility control systems and FTM:
The driving stability control systems 
and the Flat Tire Monitor have failed.
All warning lamps come on in yellow:
The driving stability control systems and the 
Flat Tire Monitor have failed. The electronic 
brake-force distribution is still active.
Have the system checked as soon as possible.
Drive cautiously, think well ahead and 
avoid full brake applications, otherwise 
accidents could result.
<
Display
of this malfunction on Cana-
dian models.
Display
of this malfunction on Cana-
dian models.
With xDrive 325xi, 330xi
If one of the malfunctions described 
below occurs, drive cautiously and think 
well ahead. Also avoid situations that require full 
braking, otherwise accidents could result. 
Avoid driving on rough tracks and pressing the 
accelerator pedal down to full throttle or kick-
down position, otherwise the drive system 
could be damaged.
<
The warning lamps for the brake sys-
tem come on in red, together with the 
yellow indicator lamps for driving sta-
bility control systems and FTM:
The driving stability control systems 
and the Flat Tire Monitor have failed.
All warning lamps come on in yellow:
The driving stability control systems and the 
Flat Tire Monitor have failed. The electronic 
brake-force distribution is still active.
Have the system checked as soon as possible.
Display
of this malfunction on Cana-
dian models.
Display
of this malfunction on Cana-
dian models.
Drive-off assistant
The drive-off assistant enables you to drive off 
smoothly on uphill gradients. It is not necessary 
to use the handbrake for this.
1.
Hold the car in place by depressing the 
brake.
2.
Release the brake and drive off without 
delay.
The drive-off assistant holds the car in 
place for approx. 2 seconds after the 
brake is released. Depending on vehicle load, 
the car may roll backwards a little during this 
time span. Drive off without delay after releas-
ing the brake. Otherwise, the drive-off assistant 
will no longer hold the car in place after approx. 
2 seconds and the car will start to roll back-
wards.
<
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG