BMW 2006 330xi Sedan Manual Do Proprietário

Página de 245
 93
Lamps
Parking lamps/low beams
Lamps off and daytime driving lamps
Parking lamps and daytime driving lamps
Low beams
Automatic headlamp control
and Adaptive 
Head Light
*
Parking lamps
In switch position
1, the front, rear and side 
vehicle lighting is switched on. You can use the 
parking lamps for parking. For the additional 
option of roadside parking lamps on one side of 
the car only, refer to page
The parking lamps will discharge the bat-
tery. Therefore, do not leave them on for 
unduly long periods of time, otherwise the bat-
tery might not have enough power to start the 
engine.
<
Low beams
The low beams light up when the light switch is 
in position 
2 and the ignition is on.
If desired, the light switch can remain in the low-
beam headlamp position. The exterior lamps 
are automatically switched off after the vehicle 
is parked.
If necessary, switch on the parking lamps as 
described in the section about parking lamps.
Automatic headlamp control*
When the switch is in position
3, the low beams 
are switched on and off automatically depend-
ing on ambient light conditions, e.g. in a tunnel, 
in twilight, or if there is precipitation. The LED 
next to the symbol is illuminated when the low 
beams are on.
When driving into tunnels with bright overhead 
lights, there may be a delay before the head-
lamps come on.
The headlamps may also come on when the 
sun is sitting low on a blue sky.
The low beams remain switched on inde-
pendent of the ambient lighting condi-
tions when you switch on the fog lamps
*
.
When the daytime driving lamps are activated, 
refer to page
, the low-beam headlamps are 
always switched on when the switch is in posi-
tion 
3 and the ignition is on.
<
If desired, the light switch can remain in position 
3. The exterior lamps are automatically 
switched off after the vehicle is parked.
The automatic headlamp control cannot 
serve as a substitute for your personal 
judgment in determining when the lamps 
should be switched on in response to ambient 
lighting conditions. For example, the system 
cannot detect fog or hazy weather. To avoid 
safety risks, you should always switch on the 
lamps manually under these conditions.
<
Adjusting sensitivity
You can program how sensitively the system 
reacts to ambient light.
iDrive concept, refer to page
1.
Press the 
 button.
This opens the start menu.
2.
Press the controller to open the   menu.
3.
Select "Vehicle settings" and press the 
controller.
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG