BMW 2006 525xi Sedan Manual Do Proprietário

Página de 259
Opening and
 closing
42
>
The opened glass sunroof automatically 
moves into the raised position. The sliding 
visor remains completely open.
Do not use force to close the headliner 
insert with the glass sunroof in its raised 
position, otherwise the mechanism will be dam-
aged.
<
Opening, closing
>
Press switch back to the resistance point. 
The glass sunroof and the sliding visor open 
together for as long as you hold the switch 
in this position.
>
Press switch back past the resistance point. 
The glass sunroof and the sliding visor open 
automatically. Briefly press the switch again 
to stop the opening movement.
In a similar manner, the glass sunroof closes 
when you slide the switch forward. The sliding 
visor remains open and can be closed by hand.
For information on using the convenience oper-
ation at the door lock or with the remote control, 
refer to page
.
For information on comfort closing with comfort 
access, refer to page
Automatic opening and closing
Press the switch past the resistance point.
The following movements are also automatic:
>
When the sunroof is open, press the switch 
in the lifting direction: the sunroof is raised 
all the way.
>
When the sunroof is raised, press the 
switch in the opening direction: the sunroof 
is opened all the way.
Pressing the switch again stops the motion.
Pinch protection system
If the glass sunroof encounters resistance when 
closing from roughly the center of the roof 
opening or when closing from the raised posi-
tion, the closing action is interrupted and the 
glass sunroof reopens a short way.
Despite the pinch protection system, 
inspect the sunroof's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as 
very thin objects, and the sunroof would con-
tinue closing. 
Pressing the switch beyond the resistance 
point and holding it there deactivates the pinch 
protection system.
<
Following interruptions in electrical 
power supply
After a power loss, the sunroof may only 
respond to the lift command. The system must 
be initialized. BMW recommends having this 
work done by your BMW center.
Moving manually
In the event of an electrical malfunction, you can 
move the glass sunroof manually:
1.
Fold the cover panel down, if necessary 
using a screwdriver from the onboard tool 
kit, refer to page
2.
Insert the Allen wrench supplied with the 
onboard tool kit, refer to page
, into the 
opening provided. Move the glass sunroof 
in the desired direction. The arrow below 
indicates the rotation direction for closing.
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG