BMW 2011 128i Convertible Manual Do Proprietário
La
mp
s
92
3.
"Welcome light"
Welcome lamps are activated and are
stored for the remote control currently in use.
Pathway lighting
If you activate the headlamp flasher after
switching off the ignition with the lamps
switched off, the low beams come on and
remain on for a certain time.
switching off the ignition with the lamps
switched off, the low beams come on and
remain on for a certain time.
Setting the duration or deactivating
1.
"Settings"
2.
"Lighting"
3.
"Pathway light.:"
4.
Set a time of duration, or 0 s to deactivate
the function.
the function.
The setting is stored for the remote control cur-
rently in use.
rently in use.
Daytime running lights
The daytime running lights light up in switch
position
position
0, 1 and 3. They are less powerful than
the low beams.
Activating/deactivating daytime
running lights
running lights
1.
"Settings"
2.
"Lighting"
3.
"Daytime running lamps"
Daytime running lights are activated and
are stored for the remote control currently in
use.
use.
Adaptive light control*
The concept
Adaptive light control is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In tight curves at speeds up to 40 mph/70 km/h,
e.g. on mountainous roads or when turning, an
additional, corner-illuminating lamp is switched
on that lights up the inside area of the curve.
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In tight curves at speeds up to 40 mph/70 km/h,
e.g. on mountainous roads or when turning, an
additional, corner-illuminating lamp is switched
on that lights up the inside area of the curve.
Activating adaptive light control
With the ignition switched on, turn the light
switch to position
switch to position
3, refer to page
.
The corner-illuminating lamp is switched on
automatically, depending on the steering wheel
angle or turn signal indicator.
Standstill function
automatically, depending on the steering wheel
angle or turn signal indicator.
Standstill function
*
: to avoid blinding oncoming
traffic, the adaptive light control directs light
towards the front passenger side when the
vehicle is at a standstill.
When you are reversing, only the corner-illumi-
nating lamps are switched on and active on
both sides.
towards the front passenger side when the
vehicle is at a standstill.
When you are reversing, only the corner-illumi-
nating lamps are switched on and active on
both sides.
Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG