BMW 2008 M5 Sedan Manual Do Proprietário

Under t

208

Engine oil

The engine oil consumption is dependent on
driving style and driving conditions.

Checking engine oil level

Your vehicle is equipped with an electronic oil
level check.
The oil level can be displayed when the engine
is at operating temperature. Constant short-
distance driving or a very sporty driving style
can make it impossible for a measurement to be
taken.

Displays in instrument cluster

You can display the current oil level in the
instrument cluster.

1 Oil level
2 Maximum marking
3 Minimum marking
4 BC button
Press the button

4 in the turn signal lever

repeatedly until the display for the oil level
appears in the instrument cluster.

Manual transmission: the engine oil level
will be shown in the lower display.

The oil level must be between the two marks.
A new measurement is automatically taken
after each engine start.

Possible displays

1 Oil level OK
2 Oil level is being determined.

This process takes about 1 minute when
stopped on a level surface.
If the engine oil has been topped off, the
measurement of the oil level can take up to
30 minutes.

3 Oil level at minimum:

Add a maximum of 1 US quart/1 liter of
engine oil at the next opportunity, refer to
Adding engine oil below Add at least
0.5 US quart/0.5 liter. Otherwise the oil
level control may not display the new value
correctly.
If the oil level displayed is below minimum,
add engine oil immediately. Failure to do so
may lead to engine damage.

4 Oil level too high

Have the vehicle checked immedi-
ately, otherwise engine damage may

result if too much oil has been added.

5 No value can be determined at this time.

Engine is not yet at operating temperature.