BMW 2008 M5 Sedan Manual Do Proprietário

riv

g ti

uni

iga

lity

Displays in instrument cluster

1 Gear 1 to 7, R, N engaged
2 Selected driving program,

matches the number of illuminated fields,
refer to Drivelogic on page

3 In drive mode, the currently selected gear

followed by a D is displayed

The gear display flashes when you open
the driver's door with the engine running.

If you do not subsequently operate the pedals,
shift paddles, or selector lever, then the system
shifts into N.

Gear changes

Using selector lever

To upshift, pull the selector lever back.

To downshift, push the selector lever for-
ward.

Using shift paddles on steering wheel

To upshift, briefly pull the right shift
paddle +.

To downshift, briefly pull the left shift
paddle –.

Drivelogic

With Drivelogic various driving programs are
available to you.
Each time you change between the Sequential
mode and the Drive mode, the respective last
program is active. Exception: after the first
change from the Sequential to the Drive mode,
driving program 3 is active.

In Drive mode

There are five different driving programs, rang-
ing from relaxed 1 to sporty/highly dynamic 5.

In Sequential mode

You can choose from six driving programs rang-
ing from balanced/dynamic 1 to sporty/purist 6.
Each time the engine is started, driving
program 3 is activated.
Program 6 is only available when the DSC
Dynamic Stability Control is deactivated, refer
to page

. If DSC is activated, then the system

switches from program 6 to program 5

To maintain vehicle stability, always acti-
vate DSC whenever possible.

Selecting driving program with button

in center console

Press the button repeatedly until the desired
driving program is displayed in the instrument
cluster, refer to page.