McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador

 

Note:

If you used the “Manual Configuration of the Initial 

IP Settings” procedure in Appendix H, complete the 
“Update UltraNet ConfigManager with the Manual 
Configurations” procedure before delivering the 
configured network.

To set the properties for delivery of the network map configurations, 
use the following procedure:

1. Right-click the desired node 

, then select Properties.

The Node10 Properties (UltraNet Edge 3000) screen appears, 
where 1000 refers to the Edge model number.

2. Click on the drop-down menu to select the Delivery Interface.

The Delivery Interface defines the IP address by which the 
network map will be delivered. 

3. Select the desired option to deliver the network map 

(configurations) to the node(s).

4. Click OK.

5. Repeat these steps for the other node(s).

6. Deliver the network map (configurations) by either the Delivery 

 or the Deliver Network option (below).

The Delivery Wizard delivers, activates, and resets the 
configurations on selected node(s). Use the following procedure to 
perform any of these functions on one or more node(s):

1. Click the File menu, then select Delivery Wizard.

The Delivery Wizard - Introduction screen appears.