McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador

McDATA UltraNet Edge 3000 User Guide

1. Turn off both power supplies on the UltraNet Edge 3000.

2. Unplug the power cords.

3. Locate the four screws on the top cover of the UltraNet Edge 

3000.

4. Remove the four screws from the top cover using the small 

Phillips screwdriver.

5. To remove the top cover, you must slide the cover towards the 

rear of the unit as it is locked into the chassis.

6. Follow the Top Cover Installation Procedure to install the cover.

Use the following procedure to install the top cover onto the UltraNet 
Edge 3000.

A small Phillips screwdriver and an adjustable 

Torque driver, rated between 3 and 15 in-lbs.

Sb1

1

7