McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador

12-16

McDATA UltraNet Edge 3000 User Guide

OC-3 ATM Interface Card Installation Procedure

8. Follow the OC-3 ATM Interface Card Installation Procedure to

install the new OC-3 ATM interface card.

OC-3 ATM Interface Card Installation Procedure

Use the following procedure to install the OC-3 ATM interface card
into the UltraNet Edge 3000 chassis.

Tools required:

A small Phillips screwdriver and an adjustable

Torque driver, rated between 3 and 15 in-lbs.

CAUTION

Make sure the power is off. Attach a wrist strap and follow ESD
procedures (see page B-19) during the handling of all electronic
components.

1. Carefully insert the OC-3 ATM interface card in I/O 3.

The OC-3 ATM interface card will plug into I/O 3, location J8 and
J9 on the motherboard.

2. Secure the OC-3 ATM interface card using the two screws that

were made available during the removal procedure. Torque to 6
in-lbs

3. Reconnect the power cords (rear).

4. Turn on the power supplies.

5. Replace the cover by following the Top Cover Installation

Procedure..

Sb1

OC-3 Interface
Card

Screw (2)

I/O 4

I/O 2

I/O 1

I/O 3