McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador

***** PASSED--- DMA Incr Byte Test          passed = 1, 
failed = 0
DMA Incr Packet Test running...
***** PASSED--- DMA Incr Packet Test        passed = 1, 
failed = 0
DMA Incr Pkt/Byte Test running...
***** PASSED--- DMA Incr Pkt/Byte Test      passed = 1, 
failed = 0
DMA1/2 Test running...
***** PASSED--- DMA1/2 Test                 passed = 1, 
failed = 0
DMA1/2 Incr Byte Test running...
***** PASSED--- DMA1/2 Incr Byte Test       passed = 1, 
failed = 0
DMA1/2 Incr Packet Test running...
***** PASSED--- DMA1/2 Incr Packet Test     passed = 1, 
failed = 0
DMA1/2 Incr Pkt/Byte Test running...

***** PASSED--- DMA1/2 Incr Pkt/Byte Test   passed = 1, 
failed = 0

The UltraNet Edge 3000 Fibre Channel diagnostic program resides on 
the UltraNet Edge 3000’s flash drive as the file fcbb.dll. Using the 
PROM interface, the file must be loaded into memory and executed 
from there. 

This program tests the UltraNet Edge 3000’s Fibre Channel module 
and verifies that it can perform memory transfer functions to the local 
memory and the global memory. Test data can be looped back either 
internally or externally.

Individual tests can be selected from the menu or the 99. All Tests 
option can be used to run tests 3 through 22.

*> SBTM Fibrhannel BB Diagnostic Test Rev. 1.1 - May 04, 
2003 <*

MAIN MENU
Options={ SINGLE  STOP   0  1 }  Total Errors={ 0 } Tests 
Run={  }
Parameters={ 648  10000  00  0011  1  4  AAL5  Random  
01020304 }
  { BUFFER_BLD  COMPARE_DATA  BUFFER_CLR  ADD_CRC_TO_OB  
}
  {*FC-BB#0:B#1/D#1:PCI#1: D0010000 D0080000 40221000 
44000000 }
  { 20  0  Internal Loopback  FPGA Ver 12  FC-BB Board }
  { BUFFER_MEM  2.13 Gbps RATE }
  {*FC-BB#1:B#2/D#1:PCI#2: D4010000 D4080000 40221000 
44000000 }
  { 20  0  Intrd }