McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador
D-4
Configuring the Internal McDATA Fibre Channel Switch Interface
Domain ID
Select the domain ID from the drop-down menu. This is the domain
ID of the Fibre Channel Switch application. The drop-down menu
displays all available IDs. Domain IDs are in the range of 1 to 239.
The default domain ID is 1.
ID of the Fibre Channel Switch application. The drop-down menu
displays all available IDs. Domain IDs are in the range of 1 to 239.
The default domain ID is 1.
Destination Node
The information for the destination node is displayed if available. If
this information is not available, N/A is displayed.
this information is not available, N/A is displayed.
Advanced Tab
Configure the advanced FC Switch parameters from this tab.
Switch Priority
Select the Switch Priority from the drop-down menu. This field
specifies the priority of the Fibre Channel Switch application.
Priorities are in the range of 0 to 255, where 0 is the highest and 255 is
the lowest. The default priority is 1.
specifies the priority of the Fibre Channel Switch application.
Priorities are in the range of 0 to 255, where 0 is the highest and 255 is
the lowest. The default priority is 1.
RA_TOV in mS
Enter the RA_TOV (ms) value (in milliseconds) in this field. This
field specifies the Resource Allocation Timeout value in milliseconds
for the Fibre Channel Switch application. The default value is 10000.
field specifies the Resource Allocation Timeout value in milliseconds
for the Fibre Channel Switch application. The default value is 10000.