Lucent Technologies Speaker 585-210-940 Manual Do Utilizador
Installing Mirrored Systems
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
How to upgrade an Enterprise platform to disk mirroring
20
Step 7: Set up the
mirrors for the
mirrors for the
root
file system
2
Set up the mirrors for the
root file system with the following steps:
1. Activate metadevice d11:
2. Activate metadevice d13:
3. Activate metadevice d12:
4. Attach d12 to d13:
5. Verify that root is set up and resynching:
Check the
State:
lines in the output list. They should read either
Okay
or
Resyncing
. If they do, then everything is fine. If they
indicate any other status, something has gone wrong with the setup:
discontinue the upgrade and telephone the Lucent National
Customer Care Center (1.800.242.2121) or contact your Lucent
representative or distributor.
discontinue the upgrade and telephone the Lucent National
Customer Care Center (1.800.242.2121) or contact your Lucent
representative or distributor.
#
metainit
-f
d11
d11: Concat/stripe is set up
#
#
#
metainit
-f
d13
d13: Concat/stripe is set up
#
#
#
metainit
-f
d12
d12: Concat/stripe is set up
#
#
#
metattach
d13
d12
d13: submirror d12 is attached
#
#
#
metastat d13
d13: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Resyncing
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 2209680 blocks
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Resyncing
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 2209680 blocks
.
.
.
.
.