BMW 2010 650i Convertible Manual Do Proprietário

Replacing components

212

Replacing components

Onboard vehicle tool kit

Coupe

Convertible

The onboard tool kit is located in the luggage
compartment under the floor mat.

Replacing wiper blades

Fold the wiper arm out and grasp firmly.

Press the safety tabs together while sliding
the wiper blade toward the front to disen-
gage it.

Mount the new wiper blade and slide in until
it is heard to engage.

Lamps and bulbs

Lamps and bulbs make an essential contribu-
tion to vehicle safety. You must be duly diligent
in replacing them. If you are not familiar with the
specified procedures, have the corresponding
work carried out at your BMW center.

Never touch the glass of new bulbs with
your bare fingers, as even minute

amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean cloth, napkin, etc., or hold the bulb by its
metal socket.

A selection of replacement bulbs is available at
your BMW center.

Whenever you perform any work on the
electrical system, turn off the systems/

consumers involved to prevent short circuits
from occurring. To avoid possible injury or
equipment damage when replacing bulbs,
observe any instructions provided by the bulb
manufacturer.

For information on how to care for the head-
lamps, please follow the instructions on
page

208

For bulbs for which changing is not
described, and for checking and adjusting

headlamp aim, please contact your BMW cen-
ter.

Light-emitting diodes LEDs

Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.