BMW 2010 650i Convertible Manual Do Proprietário

Transporting child

ren safely

Unlocking safety belt

Open the belt buckle.

Remove the child restraint system.

Allow the belt webbing to retract com-
pletely.

LATCH child restraint fixing

system

LATCH: Lower Anchor and Tethers for Chil-
dren.

Follow the system manufacturer's
instructions on installation and use of

LATCH child restraint systems in order not to
impair their protective function.

Anchor points for LATCH mounts

Before attaching the LATCH child seat, pull the
belt away from the region of the child restraint
fixing system.

Make sure that both of the lower LATCH
mounts have properly clicked into place

and that the child restraint system is resting
snugly against the backrest. Otherwise, the
protective action may be impeded.

Rear seats

The mounting points for the LATCH anchors
are located at the positions indicated by arrows
in the gap between the seat and the backrest.

Upper LATCH retaining strap

Convertible

For Canadian Customers Only

The following statement is required by Trans-
port Canada:
This vehicle is not equipped with user-ready
tether anchorages. As such neither a child
restraint system, nor a booster cushion, requir-
ing the use of a tether strap can be properly
secured in the vehicle.

Coupe

Only use the top tether-strap mounting
points to secure child restraint systems,

otherwise the mounting points could be dam-
aged.

There are two additional mounting points for
child restraint systems with a tether strap, refer
to arrows.

Placement of tether strap

Make sure that the tether strap is not
routed over sharp edges and does not

twist on its way to the upper mounting point;
otherwise, the belt may not properly secure the
child restraint system in the event of an acci-
dent.

1 Direction of travel
2 Head restraints
3 Tether strap hook