BMW 2010 650i Convertible Manual Do Proprietário
61
Releasing
1.
Unclip the sleeve of the selector lever.
2.
Pull the sleeve over the selector lever.
3.
Reach into the trim-piece opening, arrow
1,
and firmly pull the trim piece upward,
arrow
arrow
2.
4.
Remove cover over the opening, refer to 5.
5.
Insert a screwdriver from the onboard tool
kit, refer to page
kit, refer to page
, into the opening,
arrow
1.
6.
Pull the screwdriver toward the rear until it is
heard to engage, arrow
heard to engage, arrow
2, and leave it
inserted in the opening. The transmission
lock is released.
lock is released.
Locking
1.
Pull out the screwdriver upward.
The transmission lock is locked again.
The transmission lock is locked again.
2.
Reinstall the cover and the trim piece.
Information on jump starting and towing from
page
page
.
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
To turn off manually, press the lever to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates the failure of a turn signal
lamp indicates the failure of a turn signal
lamp.
<
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
long as you wish to signal.
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG