BMW 2010 650i Convertible Manual Do Proprietário

nolo

r co

mfort

, c

nve

e an

Due to the system's need to adjust periodically,
a still image is displayed at certain intervals for
fractions of a second. This is normal and not an
indication of a problem.
To prevent driving without headlamps, at a
speed of more than approx. 3 mph/5 km/h and
when dark, the thermal image on the Control
Display is only shown when the low beams are
on.

Deactivating BMW Night Vision

Press the button.

Press the

button.

Via iDrive, refer to Selecting settings.

Selecting settings

iDrive, for explanation of principle, refer to
page

Activate BMW Night Vision.

Press the controller.

Open the desired menu item.

"Brightness"

"Contrast"

"Zoom & Curve mode"

The settings are stored for the remote control
currently in use.

To exit the menu:
The image automatically disappears after
approx. 5 seconds.

Cleaning camera

The function of the camera may be affected by
heavy rain and fog, dirt, snow or ice on the lens.
When this occurs, the displayed image on the
Control Display may become gray.
To minimize icing, the camera lens is automati-
cally heated. However, it may be necessary to
clean the camera lens manually under severe
weather conditions. When doing so, cautiously
remove any debris, ice or snow. To avoid dam-
age to the lens, do not use sharp or abrasive
instruments to clean ice, snow, or dirt off the
lens.
When the windshield is cleaned with the head-
lamps on, the camera lens area is automatically
sprayed as well. Refer to page

Lane Departure Warning*

The concept

This system warns you from a speed of approx.
40 mph/70 km/h when the vehicle is leaving the
lane you are currently in on roads with lane
demarcation lines. You feel this due to a slight
vibration of the steering wheel.
The system does not warn you if you signal
before leaving the lane.
It is best to use the system on well-developed
roads and freeways.