BMW 2007 M6 Coupe Manual Do Proprietário
Giving and
receiv
ing
as
sistance
220
First-aid kit*
The first-aid kit is located in the filler element of
the rear seat backrest.
the rear seat backrest.
1.
Press the button downward and pull the
filler element forward.
filler element forward.
2.
Take out first-aid kit.
To refit the filler element, insert the two
bottom tabs into the strip and press the
bottom tabs into the strip and press the
filler element back into place. Make sure that
you do not damage the rear seat upholstery.
you do not damage the rear seat upholstery.
<
Some of the articles contained in the first-aid kit
have a limited service life. For this reason, check
the expiration dates of each of the items regu-
larly and replace any whose expiration dates
have passed.
have a limited service life. For this reason, check
the expiration dates of each of the items regu-
larly and replace any whose expiration dates
have passed.
Roadside Assistance*
The Roadside Assistance of the BMW Group
offers you assistance in the event of a break-
down around the clock, including on weekends
and public holidays.
The phone numbers of the Roadside Assis-
tance in your home country can be found in the
BMW Contact directory.
offers you assistance in the event of a break-
down around the clock, including on weekends
and public holidays.
The phone numbers of the Roadside Assis-
tance in your home country can be found in the
BMW Contact directory.
With BMW Assist you can contact the Roadside
Assistance of the BMW Group for assistance in
the event of a breakdown directly via iDrive,
refer to page
Assistance of the BMW Group for assistance in
the event of a breakdown directly via iDrive,
refer to page
.
Jump starting
When your battery is discharged, you can use
two jumper cables to start your BMW with
power from the battery in a second vehicle. You
can also use the same method to help start
another vehicle. Use only jumper cables with
fully-insulated clamp handles.
two jumper cables to start your BMW with
power from the battery in a second vehicle. You
can also use the same method to help start
another vehicle. Use only jumper cables with
fully-insulated clamp handles.
To avoid the risk of potentially fatal injury,
always avoid all contact with electrical
always avoid all contact with electrical
components while the engine is running. Care-
fully adhere to the following sequence, both to
prevent damage to one or both vehicles, and to
guard against possible personal injuries.
fully adhere to the following sequence, both to
prevent damage to one or both vehicles, and to
guard against possible personal injuries.
<
Preparing
1.
Check whether the battery of the other
vehicle has a voltage of 12 Volts and
approximately the same capacitance in Ah.
This information can be found on the bat-
tery.
vehicle has a voltage of 12 Volts and
approximately the same capacitance in Ah.
This information can be found on the bat-
tery.
2.
Switch off the engine of the vehicle provid-
ing assistance.
ing assistance.
3.
Switch off any electrical systems and com-
ponents in both vehicles.
ponents in both vehicles.
There must not be any contact between
the bodies of the two vehicles; otherwise,
the bodies of the two vehicles; otherwise,
there is a danger of short circuiting.
<
Connecting jumper cables
To avoid personal injury from sparks, fol-
low this sequence when connecting
low this sequence when connecting
jumper cables.
<
In your BMW M6, the so-called jump-starting
terminal for jump starting in the engine com-
partment serves as a positive terminal for the
battery, also refer to engine compartment over-
view on page
terminal for jump starting in the engine com-
partment serves as a positive terminal for the
battery, also refer to engine compartment over-
view on page
. The cover cap is marked with
a +.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG