BMW 2007 M6 Coupe Manual Do Proprietário

Página de 256
 95
Lamps
Parking lamps/low beams
Lights off and daytime running lamps
*
Parking lamps and daytime running lamps
*
Low beams
Automatic headlamp control,
 
daytime run-
ning lamps
and Adaptive Head Light
*
Parking lamps
In switch position
1, the front, rear and side 
vehicle lighting is switched on. You can use the 
parking lamps for parking.
The parking lamps drain the battery. Do 
not leave them switched on for long peri-
ods of time, otherwise it may no longer be pos-
sible to start the engine. It is preferable to 
switch on the roadside parking lamps on one 
side, refer to page
.
<
Low beams
The low beams light up when the light switch is 
in position 
2 and the ignition is on.
If the light switch remains in position 
2, the 
exterior lamps are switched off automatically 
when the driver's door is opened while the igni-
tion is off.
Switch on the parking lamps if required as 
described under Parking lamps.
Automatic headlamp control
In switch position
3, the system activates the 
low beams and switches them on or off in 
response to changes in ambient light condi-
tions, for instance, in a tunnel, at dawn and dusk 
and in case of precipitation. Adaptive Head 
Light
*
 is active. The LED next to the symbol is 
illuminated when the low beams are on.
A blue sky with the sun low on the horizon can 
cause the lights to be switched on.
If desired, the light switch can be left in posi-
tion
3. The exterior lighting is automatically 
switched off after switching off the vehicle.
The automatic headlamp control cannot 
serve as a substitute for your personal 
judgment in determining when the lamps 
should be switched on in response to ambient 
lighting conditions. For example, the sensors 
cannot detect fog of hazy weather. To avoid 
safety risks, you should always switch on the 
low beams manually under these conditions.
<
Pathway lighting
When you activate the headlamp flasher after 
parking the vehicle and switching off the lamps, 
the low beams will come on for a brief period. 
You can set the duration or deactivate the func-
tion via iDrive.
iDrive, for explanation of principle, refer to 
page
1.
Press the 
 button.
This opens the start menu.
2.
Press the controller to open the   menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG