BMW 2009 328i Coupe Manual Do Proprietário

 47

rests so that they are locked in place. Otherwise 
there is a risk of accident due to an unexpected 
movement.

<

Press once for each temperature level. 
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx. the next 
15 minutes, the seat heating is automatically 
activated at the previously set temperature.
The temperature is lowered or the heating is 
switched off entirely to save on battery power. 
The LEDs stay lit.

You can store and call up two different combi-
nations of driver's-seat and exterior-mirror 
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.

1.

Switch on radio readiness or the ignition, 
refer to page

2.

Adjust the seat and exterior mirrors to the 
desired positions.

3.

Press the 

 button.

The LED in the button lights up.

4.

Press the desired memory button 

1 or 2: the 

LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.

Do not call up memory while you are driv-
ing, otherwise unexpected seat move-

ment could result in an accident.

<

1.

Unlock and open the driver's door or switch 
on radio readiness, refer to page

2.

Briefly press the desired memory button

or 

2.

The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.

1.

Close the driver's door and switch the igni-
tion on or off, refer to page

.

2.

Press the desired memory button

1 or 2 

and keep it pressed until the adjustment 
process has been completed.

If the 

 button was pressed accidentally:

Press the button again; the LED goes out.

Online Edition for Part no. 01 41 2 600 967  - © 09/08 BMW AG