BMW 2009 328i Coupe Manual Do Proprietário

 53

3.

Allow the belt strap to retract and pull it taut 
against the child-restraint system.

The safety belt is locked.

1.

Open the belt buckle.

2.

Remove the child-restraint system.

3.

Allow the safety belt strap to retract all the 
way.

LATCH: Lower Anchors and Tethers for CHil-
dren.

To install and use the LATCH child 
restraint system, follow the operating and 

safety instructions provided by the manufac-
turer of the system, otherwise the protective 
function of the seat may be compromised.

<

Before installing the child seat, pull the belt out 
of the area for the child-restraint fixing system.

Ensure that both lower LATCH anchors 
are correctly engaged and that the child 

restraint system is resting firmly against the 
backrest, otherwise the protective function of 
the seat may be compromised.

<

The anchor points for the lower LATCH 
anchors are located behind the labeled protec-
tive caps.

Use the top tether anchors to secure 
child-restraint systems only, otherwise 

the anchors could be damaged.

<

For child-restraint systems with tether straps 
there are two additional anchors, see arrows.

Make sure the upper retaining strap does 
not run over sharp edges and is not 

twisted as it passes to the top anchor. Other-
wise the strap will not properly secure the child-
restraint system in the event of an accident.

<

1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor
5 Rear window shelf
6 Seat backrest
7 Upper retaining strap of child-restraint sys-

tem

If necessary, fold the anchors upward before 
use.

1.

Push the head restraint upward.

2.

Guide the upper retaining strap between 
the head restraint holders.

3.

Use the hook to clip the retaining strap to 
the anchor.

4.

Push the head restraint into its lowermost 
position.

Online Edition for Part no. 01 41 2 600 967  - © 09/08 BMW AG