BMW 2009 328i Coupe Manual Do Proprietário
Driving
56
place the transmission in neutral or engage
selector lever or transmission position P and
forcefully apply the parking brake to prevent the
car from moving.
selector lever or transmission position P and
forcefully apply the parking brake to prevent the
car from moving.
<
Avoid frequent starting in quick succes-
sion as well as repeated start attempts in
sion as well as repeated start attempts in
which the engine does not start. Otherwise, the
fuel is not burned or incompletely burned and
there is a danger of overheating and damaging
the catalytic converter.
fuel is not burned or incompletely burned and
there is a danger of overheating and damaging
the catalytic converter.
<
Do not wait for the engine to warm up while the
vehicle remains stationary. Start driving right
away, but at moderate engine speeds.
vehicle remains stationary. Start driving right
away, but at moderate engine speeds.
Manual transmission
.
1.
Depress the brake.
2.
Depress the clutch and shift to neutral posi-
tion.
tion.
3.
Press the start/stop button.
The starter operates automatically for a certain
time, and stops automatically as soon as the
engine has started.
time, and stops automatically as soon as the
engine has started.
Automatic transmission
.
1.
Depress the brake.
2.
Move the selector lever to position P.
3.
Press the start/stop button.
The starter operates automatically for a certain
time, and stops automatically as soon as the
engine has started.
time, and stops automatically as soon as the
engine has started.
Switching off the engine
Always take the remote control with you
when you leave the vehicle.
when you leave the vehicle.
When parking, apply the parking brake force-
fully, otherwise the vehicle could begin to roll.
fully, otherwise the vehicle could begin to roll.
<
Manual transmission
1.
With the car at a standstill, press the start/
stop button.
stop button.
2.
Shift into first gear or reverse.
3.
Forcefully apply the parking brake.
4.
Removing the remote control from the igni-
tion lock, refer to page
tion lock, refer to page
Automatic transmission
1.
With the car at a standstill, move the selec-
tor lever to position P.
tor lever to position P.
2.
Press the start/stop button.
3.
Forcefully apply the parking brake.
4.
Removing the remote control from the igni-
tion lock, refer to page
tion lock, refer to page
Parking brake
The parking brake is primarily intended to pre-
vent the vehicle from rolling while parked; it
brakes the rear wheels.
vent the vehicle from rolling while parked; it
brakes the rear wheels.
Indicator lamp
The indicator lamp is lit, and when you
drive off an acoustic signal sounds in
addition. The parking brake is still
drive off an acoustic signal sounds in
addition. The parking brake is still
applied.
Indicator lamp for Canadian models.
Applying
The lever locks in position automatically.
Online Edition for Part no. 01 41 2 600 967 - © 09/08 BMW AG