BMW 2007 M5 Sedan Manual Do Proprietário

210

The onboard toolkit is located in the luggage 
compartment lid.
Loosen the wing nut to open.

1.

Fold the wiper arm out and grasp firmly.

2.

Press the safety tabs together while sliding 
the wiper blade toward the front to disen-
gage it.

3.

Mount the new wiper blade and slide in until 
it is heard to engage.

Lamps and bulbs make an essential contribu-
tion to vehicle safety. You must be duly diligent 
in replacing them. BMW recommends having 
your BMW center perform any work that you do 
not feel competent to perform yourself or that is 
not described here.

Never touch the glass of new bulbs with 
your bare fingers, as even minute 

amounts of contamination will burn into the 
bulb's surface and reduce its service life. Use a 
clean cloth, napkin, etc., or hold the bulb by its 
metal socket.

<

A selection of replacement bulbs is available at 
your BMW center.

Only replace bulbs when cool, as other-
wise you may be burned.

<

Whenever you perform any work on the 
electrical system, turn off the systems/

consumers involved to prevent short circuits 
from occurring. To avoid possible injury or 
equipment damage when replacing bulbs, 
observe any instructions provided by the bulb 
manufacturer.

<

For care and maintenance of the headlamps, 
please follow the instructions in the separate 
Caring for your vehicle brochure.

For bulbs for which changing is not 
described, and for checking and adjusting 

headlamp aim, please contact your BMW cen-
ter.

<

Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of 
the controls and displays in your vehicle. These 
light-emitting diodes, which operate using a 
concept similar to that applied in conventional 
lasers, are officially designated as Class 1 light-
emitting diodes.

ba8_m5us.book  Seite 210  Montag, 5. Februar 2007  12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG