BMW 2006 550i Sedan Manual Do Proprietário
Adju
stmen
ts
50
Releasing
1.
Grasp the belt firmly.
2.
Press the red button in the buckle.
3.
Guide the belt into its reel.
The shoulder strap's anchorage point will be
correct for adult seat occupants of every build if
the seat is correctly adjusted, refer to page
correct for adult seat occupants of every build if
the seat is correctly adjusted, refer to page
.
The two rear safety belt buckles integrated into
the rear seat are for passengers sitting on the
left and right. The belt buckle embossed with
the word CENTER is intended exclusively for
use by passengers riding in the center position.
the rear seat are for passengers sitting on the
left and right. The belt buckle embossed with
the word CENTER is intended exclusively for
use by passengers riding in the center position.
Damage to safety belts
In the event of loads caused by accidents
or other damage: replace the belt system
or other damage: replace the belt system
including the safety belt tensioner and any child
restraint systems, and have the belt anchor
points checked. Only have this work carried out
at a BMW center or at a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise cor-
rect operation of this safety equipment is not
guaranteed.
restraint systems, and have the belt anchor
points checked. Only have this work carried out
at a BMW center or at a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise cor-
rect operation of this safety equipment is not
guaranteed.
<
Heated seats*
Front
The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
supplied when three LEDs are lit.
To switch off: press the button longer.
through its control sequence each time you
press the button. The maximum temperature is
supplied when three LEDs are lit.
To switch off: press the button longer.
Temperature distribution
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for explanation of principle, refer to
page
the seat cushion and the backrest.
iDrive, for explanation of principle, refer to
page
.
1.
Open the start menu.
2.
Move the controller to the left to open "Cli-
mate".
mate".
3.
Select "Seat heater distribution" and press
the controller.
the controller.
4.
Move the controller to the left or right to
select "Driver" or "Passenger".
select "Driver" or "Passenger".
5.
Turn the controller. The adjustment is
applied; the field can be changed.
applied; the field can be changed.
Rear
Operation as for front seat heating; two temper-
ature settings.
ature settings.
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG