BMW 2006 550i Sedan Manual Do Proprietário

Página de 259
Te
ch
nolo
gy 
fo
r co
mfort
, c
o
nve
n
ie
nc
e an
sa
fe
ty
88
HDC Hill Descent Control on 525xi, 
530xi
The concept
HDC is a system for driving downhill in steep 
terrain. This system reduces vehicle speed on 
steep downhill gradients, thus allowing you to 
maintain even better control of your BMW 
under these conditions. The vehicle moves at 
approximately twice walking speed without 
active intervention from the driver.
HDC is available for activation at vehicle speeds 
below approx. 22 mph/35 km/h. When driving 
down steep hills with a speed below approx. 
22 mph/35 km/h, the vehicle reduces speed 
automatically down to approximately double 
walking speed, approx. 7 mph/12 km/h, and 
then maintains this speed at a constant.
You can use the accelerator or brakes to vary 
this automatically controlled speed within a 
range extending from approx. 3 mph/5 km/h to 
15 mph/25 km/h.
You can specify a target speed within the same 
range by using the lever of the cruise control.
Activating HDC
You can activate HDC:
>
with the programmable buttons on the 
steering wheel, refer to page
>
or via iDrive
iDrive, for explanation of principle, refer to 
page
.
1.
Open the start menu.
2.
Press the controller to open the   menu.
3.
Select "Vehicle settings" and press the 
controller.
4.
Select "HDC" and press the controller.
5.
Select "HDC on" and press the controller.
The HDC display is shown in the instrument 
cluster.
If the vehicle is automatically braked, a message 
is displayed on the Control Display for approx. 
20 seconds.
Deactivating HDC
When you use the programmable buttons on 
the steering wheel or via iDrive, the HDC display 
goes out.
Over approx. 37 mph/60 km/h HDC is immedi-
ately deactivated, and after approx. 10 seconds 
when the ignition is switched off.
Using HDC
Manual transmission:
Use HDC in low gears and reverse gear.
Automatic transmission:
You can use HDC in every drive position.
Displays in instrument cluster
Display for target speed
HDC display
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG