BMW 2005 745Li Sedan Manual Do Proprietário
17
Control Center
The concept
The Control Center has been designed to
avoid the unnecessary complexity created
by an extended number of switches and
controls. It consists of the controller and
the Control Display.
avoid the unnecessary complexity created
by an extended number of switches and
controls. It consists of the controller and
the Control Display.
The controller is used to select the func-
tions that will appear on the Control Dis-
play. In addition, it also shows you the
Check Control messages, refer to page
tions that will appear on the Control Dis-
play. In addition, it also shows you the
Check Control messages, refer to page
Controls
1
Controller: you operate all the functions
in the Control Center by moving, turning
and pressing.
If you move the controller
in the Control Center by moving, turning
and pressing.
If you move the controller
>
you feel the mechanical guides along
the main direction of movement.
This makes it easier for you to select
the right main menus
the main direction of movement.
This makes it easier for you to select
the right main menus
>
If you turn the controller, you feel an
electronically created rasterizing.
This helps you to select the desired
menu item
electronically created rasterizing.
This helps you to select the desired
menu item
2
Button for opening the start menu from
any menu item
any menu item
3
Individual button assignment
To avoid posing an unnecessary haz-
ard, both to your own vehicle's occu-
ard, both to your own vehicle's occu-
pants and to other road users: never
attempt to use the controls or make adjust-
ments unless traffic and road conditions
allow.
attempt to use the controls or make adjust-
ments unless traffic and road conditions
allow.
<
The following introduction illustrates how
easy it is to use the Control Center.
easy it is to use the Control Center.
You can find detailed instructions describ-
ing how to use the individual systems in the
separate sections.
ing how to use the individual systems in the
separate sections.
Programming button function
You can assign specific individual functions
to the programmable button. This feature
then provides you with quick access to this
function, allowing you to control it without
undue distraction from road and traffic con-
ditions.
to the programmable button. This feature
then provides you with quick access to this
function, allowing you to control it without
undue distraction from road and traffic con-
ditions.
1.
Select "Settings" and press the control-
ler
ler
2.
Select
and press the controller
3.
Select
. Continue to press the
controller until the desired function
appears:
appears:
>
"Mode"
You can choose between the output
sources radio/FM or AM, compact-
disc CD and CD changer. The pre-
condition is that one of these
sources has been activated
You can choose between the output
sources radio/FM or AM, compact-
disc CD and CD changer. The pre-
condition is that one of these
sources has been activated
>
"FM" or "AM"
Switching over between wavebands
FM and AM, also refer to page
Switching over between wavebands
FM and AM, also refer to page
>
"Brief info"
Display of the help and supplemen-
tary texts of the active menu for
approx. 10 seconds, refer to Assis-
tance window on page
Display of the help and supplemen-
tary texts of the active menu for
approx. 10 seconds, refer to Assis-
tance window on page
.
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG