BMW 2006 325i Sedan Manual Do Proprietário

Página de 166
 51
Mix the water and antifreeze before filling 
the washer fluid reservoir to make sure 
the correct concentration is maintained.
<
Capacity
Approx. 6.3 US quarts/6 liters.
Cruise control*
The concept
Cruise control is available for use at speeds of 
approx. 20 mph or 30 km/h. The car then stores 
and maintains the speed that you specify using 
the lever on the steering column. In order to 
maintain the specified speed, the system 
brakes the vehicle when the engine braking 
effect is insufficient on downhill gradients.
Do not use cruise control when driving 
conditions are unfavorable for driving at a 
constant speed. Otherwise you could lose con-
trol of the vehicle and cause an accident as a 
result. Unfavorable driving conditions include, 
for example, winding roads, heavy traffic or a 
poor road surface, e.g. snow, rain, ice or loose 
material.
<
Manual transmission/SMG
You can shift gears while cruise control is acti-
vated. An indicator lamp notifies you that you 
should shift gears when you drive for an 
extended period at very high or very low engine 
speeds, or the system is deactivated.
In Drive mode, the SMG acts similarly to an 
automatic transmission in position D.
One lever for all functions
Storing and maintaining speed or accelerat-
ing
Storing and maintaining speed or deceler-
ating
Deactivating cruise control
Resuming a speed stored beforehand
Maintaining current speed
Tap the lever, arrow 
1, or pull it briefly, arrow 2.
The car's current speed is stored and main-
tained. It is displayed in the speedometer and 
briefly in the instrument cluster.
On uphill gradients, it may prove impossible to 
maintain the set speed if current engine power 
output is insufficient. If the engine braking 
effect is insufficient on downhill slopes, the sys-
tem will brake the vehicle slightly.
Increasing desired speed
Repeatedly press the lever to the resistance 
point or beyond, arrow
1, until the desired 
speed is reached.
>
Each time the lever is pressed to the resis-
tance point, the desired speed is increased 
by approx. 1 mph or 1 km/h.
>
Each time the lever is pressed beyond the 
resistance point, the desired speed is 
increased by up to 5 mph or 10 km/h.
The system stores and maintains the speed.
Accelerating using the lever
Accelerating slightly:
Press the lever to the resistance point, arrow 
1
until the desired speed is reached.
Accelerating significantly:
Online Edition for Part-No. 01 41 0 012 351 - © 03/06 BMW AG