BMW 2004 X5 4.8is SAV Manual Do Proprietário

Página de 200
97
n
Self-leveling suspension
*
2-axle self-leveling suspension
*
The warning lamp for the self-
leveling suspension comes on, 
or the message "SELFLEVEL 
SUSP.INACT" appears in the Check 
Control: there is a malfunction in the 
self-leveling suspension. 
Stop and inspect the vehicle. If the rear 
of the vehicle is visibly lower than the 
front, possibly accompanied by a tilt 
noticeable when you compare the left 
rear with the right rear, please respond 
by immediately proceeding to the near-
est BMW Sports Activity Vehicle center. 
Drive with appropriate caution in the 
meantime. The vehicle has reduced 
ground clearance and driving comfort 
may be noticeably reduced. 
Even when the position of the vehicle is 
normal, have the system checked as 
soon as possible when a malfunction is 
indicated.
The concept 
Your vehicle is equipped with 2-axle 
self-leveling suspension acting on both 
the front and rear suspension. This sys-
tem combines automatic self-leveling, 
which compensates for variations in 
front-to-rear load-distribution patterns, 
with a selection feature allowing drivers 
to choose from among several ride-
height options.
You may choose from among the fol-
lowing ride heights:
>
Normal
The standard setting is intended for 
most operating conditions, including 
trailer towing
>
Off-Road
Increased level for more ground 
clearance
>
Access
Lowers vehicle for more convenient 
cargo handling or easier passenger 
entries and exits.
Changes in ride height are initiated 
either manually, using the control but-
ton, refer to page 
response to specific speeds. When the 
ride height is selected manually, the 
driver has the additional option of revis-
ing the ride-height selection by entering 
a new command during the adjustment 
process.
When the vehicle is stationary, the sys-
tem executes ride-height changes in 
both directions – up and down – when-
ever the doors are closed. The liftgate/
tailgate may be open. The system 
raises the vehicle only when the engine 
is running.
The system's automatic self-leveling 
feature automatically compensates for 
variations in the vehicle's load.
Frequent changes in ride height 
initiated at short intervals can 
overheat the compressor, causing the 
system to briefly suspend active opera-
tion.
<
Online Edition for Part No. 01 41 0 158 286 - © 04/04 BMW AG