BMW 2005 330Ci Convertible Manual Do Proprietário

Página de 190
157
License plate lamps
5 watt bulb
1. Place a screwdriver in the slot and 
press toward the left to release the 
lens
2. Replace the bulb.
Light-emitting diodes
Light-emitting diodes (LEDs) installed 
behind translucent lenses serve as the 
light sources for many of the controls 
and displays in your vehicle. These 
light-emitting diodes are related to con-
ventional lasers, and legislation defines 
them as light-emitting diodes, Class 1.
Do not remove the protective lens, 
and avoid staring directly at the 
unfiltered beam for several hours, as 
inflammation of the retina could 
result.
<
Changing a wheel
Safety precautions in the event of 
a flat tire or wheel change:
Stop the vehicle as far as possible from 
passing traffic. Park on a firm, flat, sur-
face. Switch on the hazard warning 
flashers. Turn the steering wheel to the 
straight-ahead position and engage the 
steering lock. Shift into 1st or Reverse, 
or if you have an automatic transmis-
sion position the selector lever in Park, 
and engage the parking brake.
All passengers should be outside the 
vehicle and well away from your imme-
diate working area – behind a guardrail, 
for example.
If a warning triangle or portable hazard 
warning lamp is available, set it up on 
the roadside at an appropriate distance 
from the rear of the vehicle. Comply 
with all safety guidelines and regula-
tions.
Change the wheel only on a level, firm 
surface which is not slippery. Avoid 
jacking the vehicle on a soft or slippery 
support surface – snow, ice, loose 
gravel, etc. – as either the vehicle or the 
jack could slip sideways.
Position the jack on a firm support sur-
face.
Do not place wooden blocks or similar 
objects under the jack. They could pre-
vent the jack from extending to its full 
Lamps and bulbs
Overview
Controls
Maintenance
Repairs
Data
Index
Online Edition for Part-No. 01 41 0 158 118 - © 03/04 BMW AG