BMW 2005 330Ci Convertible Manual Do Proprietário

163

To establish contact with the BMW 
Group's Mobile Service:

Press button 2 for at least 2 seconds.

The indicator lamp above the buttons 
lights up. As soon as a telephone con-
nection has been set up with the Mobile 
Service, the indicator lamp flashes.

Depending on the country you are in, 
your vehicle's current location will also 
be transmitted if your vehicle is 
equipped with an activated BMW Assist 
function.

When your battery is discharged you 
can use two jumper cables to start your 
vehicle with power from the battery in a 
second vehicle. You can also use the 
same method to help start another 
vehicle. Only use jumper cables with 
fully insulated handles on the terminal 
clamps.

Do not touch high-voltage wiring 
and cables on a running engine. 

Contact with components carrying high 
voltage can be harmful or fatal. Care-
fully observe the following instructions 
to avoid personal injury and/or damage 
to one or both vehicles.

<

1. Check whether the battery of the 

support vehicle has 12 volts and 
approximately the same capacity – 
measured in Ah. This information is 
provided on the battery

2. Stop the engine of the support vehi-

cle

3. Switch off all electrical components 

in both vehicles.

Make absolutely certain that there 
is no contact between the body-

work of the two vehicles, otherwise 
there is a short circuit hazard.

<

Always adhere to this sequence 
when connecting jumper cables; 

failure to observe this procedure can 
lead to sparks at the battery terminals 
and pose an injury hazard.

<

The auxiliary jump-starting terminal 
located in your BMW's engine compart-
ment acts as the positive battery termi-
nal. Refer to the engine compartment 
overview on page, 

this auxiliary terminal is marked with 
a +.

1. Open the cover of the BMW auxiliary 

jump-starting terminal. Do so by pull-
ing the tab – see arrow 1

Online Edition for Part-No. 01 41 0 158 118 - © 03/04 BMW AG