BMW 2005 330Ci Convertible Manual Do Proprietário

95

The front, rear and side vehicle 
lighting is switched on. You can 
use the parking lamps to signal 

the position of the vehicle when it is 
parked. For lighting on one side for 
parking as an additional feature, refer to 
page 

.

When the ignition is switched off 
while the low beams are on, the 
headlamps go out and only the 

parking lamps remain on.

When you activate the headlamp 
flasher after parking the vehicle with the 
lamps turned off, the low-beam head-
lamps will come on for a short time.

You can also have this function 
deactivated.

<

When you open the driver's door after 
having turned the ignition key to posi-
tion 0, you will hear an acoustic signal 
for a few seconds to remind you that 
the lamps have not been switched off.

If you desire, the light switch can be left 
in the second position: when the igni-
tion is switched off, the external lighting 
is also switched off.

You can have the activation set-
tings for the daytime driving lamps 

programmed on your vehicle.

<

When the switch is set to this 
position the system automati-
cally activates and cancels the 

low beams in response to changes in 
ambient light, for example in tunnels, at 
dusk, and when it is raining or snowing.

The low-beam headlamps remain 
on, regardless of the ambient 

light, when you switch on the fog 
lamps.

<

Automatic headlamp control can-
not serve as a substitute for the 

driver's judgement in determining when 
the vehicle lights should be switched 
on. For example, the sensors are not 
able to detect fog. To avoid safety risks, 
you should respond to these kinds of 
low-visibility situations by switching the 
headlamps on manually.

<

You can have the sensitivity of 
your vehicle's automatic head-

lamp control adjusted.

<

Online Edition for Part-No. 01 41 0 158 118 - © 03/04 BMW AG