Laney Amplification Music Mixer Concept 10 Manual Do Utilizador

Concept

Concept Manual

MIX NOISE (measured 22Hz-22K,RMS,power amp level max)
Master Up -80Bu
1 Channel 0dB -78dBu
All channels 0dB -77dBu

MIC CHANNEL (Fader 0dB )
MIC INPUT:
Gain Max. 60dB + 10dB @ fader buffer
Gain Min . 0dB + 10dB @ fader buffer
Bandwidth 30Hz-20kHz -1dB
E.I.N. (Equivalent Input Noise)
   -128dB (150R source Z)
Distortion (mic to insets) typicaly <0.007%
Maximum input +20dB
Input Impedance 2K
LINE INPUT:
Gain Max. 36dB + 10dB @ fader buffer
Gain Min. -26dB + 10dB @ fader buffer
Bandwidth 30Hz-20kHz -1dB
EQ:
HI +12dB @ 12kHz (Shelving)
Mid +12dB @ Sweepable from 500Hz-5k5
Lo +16dB @ 80Hz (Shelving)
MIC/STEREO CHANNELS
Stereo Gain 24dB
Input overload >50V
Mic Input: (identical to mic amp on stereo channels)
Gain Max. +60dB + 10dB @ fader buffer
Gain Min. 0dB + 10dB @ fader buffer
E.I.N. -128dB (150R source Z)
EQ:
HI +12dB @ 12kHz (Shelving)
Mid +12dB @ 2KHz
Lo +16dB @ 80Hz (Shelving)
Faders Buffer +10dB
TAPE INPUTS (Ref +4dBu @ Output/Fader 0dB)
Gain 15dB
TAPE OUTPUT LEVEL Variable by user
MAXIMUM OUTPUT LEVELS
Main Outputs (unbalanced) +22dBu
  Aux Output +22dBu
Mon Output +22dBu
POWER AMPLIFIER
Power rating 2*300W into 4 Ohms (R.M.S)
Hum and Noise -100dBu (22Hz-22KHz)
Distortion <0.01
Slew Rate 20V/us
Sensitivity +4dB
Protection Short Circuit,Load
Mismatch,Thermal,D.C.
POWER CONSUMPTION 230V/115V40/60Hz 1000 Watts

DIMENSIONS
width depth height
Concept 10 477mm 449mm 180mm
Concept 16 627mm 449mm 180mm