Vinotemp VT188MBSHX Manual Do Proprietário
9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
TEMPERATURE CONTROL
Important note: In order to operate efficiently, this product should
be in an environment with an ambient temperature greater than
50°F and less than 90°F when freestanding or 85°F when built-in.
Temperature indication:
On the control panel, you will find two LED indicators: The right shows the
temperature for the upper red wine zone and left shows the temperature for
the lower white wine zone. When the cabinet temperature is too low the LED
will display “LL”. When the temperature is too high it will display “HH”. The
“ER” display shows when there has been a power disruption.
Temperature preset:
For your convenience, the wine cellar is programmed at storing temperature.
The temperature pre-set by the manufacturer is 55°F (13°C). When it is pre-
set, the upper section temperature is higher than the lower section
accordingly. Five seconds after setup, the LED will show the actual cabinet
temperature.
Setting the temperature control (manually):
You can manually adjust the temperature of the lower zone and the
temperature of the upper zone will adjust accordingly. Simply press the (-)
button on the control panel to decrease the temperature and the (+) button
to increase the temperature inside the wine cellar. The temperature range is
from 48°F (9°C) to 65°F (18°C).