Thermador PRL364NLH Manual De Instruções
English 2
Step 3: Setting Valve Screws
for the STAR
for the STAR
®
Burners
Screwdriver for valve screw setting:
The provided flat-head screwdriver is used to reposition the
valve screws for minimum flow settings on the knobs.
valve screws for minimum flow settings on the knobs.
Setting valve screws on ranges:
1. SHUT OFF THE GAS SUPPLY TO THE APPLIANCE
AND DISCONNECT THE ELECTRICAL POWER.
2. Remove knob from the valve stem by slowly pulling
knob straight out, away from the control panel.
3. Remove the bezel-mounting screw located to the right
of the valve stem using a T-20 Torx screwdriver.
4. For ExtraLow
®
valves, turn the valve stem to the LOW
position for proper access to the valve screws through
clearance holes in the XLO
clearance holes in the XLO
®
potentiometers.
5. To engage the valve screw, insert the included
screwdriver with 1/8” blade into the hole in the bezel
created by removal of the bezel-mounting screw.
created by removal of the bezel-mounting screw.
WARNING:
•
Before proceeding with the adjustment, SHUT OFF
THE GAS SUPPLY TO THE APPLIANCE PRIOR
TO DISCONNECTING THE ELECTRICAL POWER.
THE GAS SUPPLY TO THE APPLIANCE PRIOR
TO DISCONNECTING THE ELECTRICAL POWER.
•
If the information in this manual is not followed
exactly, fire or shock may result causing property
damage or personal injury.
exactly, fire or shock may result causing property
damage or personal injury.
Valve Screw
Valve screw access
Valve screw access
Valve screw access
hole with valve in
OFF
hole with valve in
OFF
hole with valve in
OFF
position.
position.
position.
Valve screw access
Valve screw access
Valve screw access
hole with valve in
LOW
hole with valve in
LOW
hole with valve in
LOW
position.
position.
position.