Thermador PRG486NLH Manual Do Proprietário

English 2

READ AND SAVE THESE INSTRUCTIONS

30" Gas Model:
120 V, 60 Hz., 10 Amp dedicated electrical circuit required.

36" Gas Models:
120 V, 60 Hz., 10 Amp dedicated electrical circuit required. 
36" gas range with electric griddle or grill - 20 Amp circuit 
required.

48" Gas Models with electric griddle or grill:
120 V, 60 Hz., 20 Amp dedicated electrical circuit required.

It is recommended that a dedicated circuit servicing this 
appliance be provided. See Installation Instructions for 
electrical requirements and grounding instructions.

The use of gas cooking appliances results in the production 
of heat and moisture.

It is the personal responsibility and obligation of you, the 
user, to have this appliance connected to the electrical 
power supply by a qualified electrician, in accordance with 
the National Electrical Code and/or applicable local codes 
and ordinances.

TESTED IN ACCORDANCE WITH: 
•

UL 858, The Standard for the Safety of Household 
Electric Ranges

•

ANSI Z21.1, The American National Standard for 

Household Cooking Gas Appliances

•

CAN 1-1.1-M81, Domestic Gas Ranges

•

CSA C22.2 No. 61, Household Cooking Ranges 

Check your local building codes for the proper method of 
installation. In the absence of local codes, this unit should 
be installed in accordance with the National Fuel Gas Code 
No. Z223.1 current issue and the National Electrical Code 

ANSI/NFPA No. 70 current issue or the Can - B149 

Installation Codes for Gas Burning Appliances and C22.1 
Canadian Electrical Code Part 1.

It is the responsibility of the owner and the installer to 
determine if additional requirements and/or standards 
apply to specific installations.

Safety Practices to Avoid Personal Injury

When properly cared for, your new THERMADOR 
PROFESSIONAL

TM

 range has been designed to be a safe, 

reliable appliance. However, use extreme care when using 
this restaurant caliber range as this type of appliance 
provides intense heat. When using kitchen appliances, 
basic safety precautions must be followed, including the 
following:

To avoid possible burn or fire hazard, a back guard 
designed specifically for this range must be installed 
whenever the range is used.

The high shelf can get hot! DO NOT place the following 
items on top of the high shelf:

•

plastics or containers that can melt

•

flammable items

•

a total load over 30 lbs. (13.6 kg)

ALWAYS DISCONNECT THE ELECTRICAL PLUG 

FROM THE WALL RECEPTACLE BEFORE 
SERVICING THIS UNIT.

FOR PERSONAL SAFETY, THIS APPLIANCE MUST 
BE CONNECTED TO A PROPERLY GROUNDED AND 
POLARIZED ELECTRICAL POWER SUPPLY.

If for any reason a gas control knob is turned ON and 
there is no electrical power to operate the electronic 
igniters on the range's cooktop STAR

® 

burners, turn 

OFF the gas control knob and wait 5 minutes for the 
gas to dissipate before lighting the STAR burner 
manually.

To light the STAR burners manually, carefully hold a 
lighted match to the STAR burner ports and turn the gas 
control knob to HI

. 

During a power failure, you can use the standard 
cooktop STAR burners, but each must be lit with a 
match.

DO NOT attempt to light the two left XLO

®

 STAR 

burners manually. These STAR burners are equipped 
with the ExtraLow

®

 feature and cannot be lit manually.